When to intervene + identifying and navigating common malpresentations during birth.

March 4, 2022

5 Min Read
3-03-22 calving.jpg
Getty Images

“I’ve got a calver, doc.” I hear these words from the other end of the line as I roll over and see that the clock reads 2 a.m. As I ask questions – more to wake myself up than to gather information – I realize I’m going to have to leave the comfort of my warm covers. I tell the farmer that I am on my way, as I start to put on layers to venture out into the cold. The drive is groggy, trying to stay awake between sips of cold, stale coffee left in the truck from the day before. As I pull up, the farmer comes out of the house to meet me and we gather all of my supplies and trek into the barn. I am thankful to be out of the wind, but it is still cold enough inside the barn to feel my breath crystallize in my nose. Lying in the corner is a docile heifer with only one of the calf’s feet sticking out. We get her into the squeeze chute, and I confirm that the calf has one leg back. It's a big calf, but I am able to get the other leg pulled up and safely deliver the calf.  

As cattle producers, I know you have all had experiences similar to this. You should never hesitate to contact your veterinarian if needed, but I am going to pass on some things that I have learned to help you feel more comfortable with calving assistance. 

When to intervene during calving  

Related:Registration now open for USMEF Spring Conference

You should provide assistance immediately if you notice an abnormal presentation of the calf (AKA back feet, only one leg, etc.) or when there is no progress after 30 minutes for a cow or 60 minutes for a heifer. 

Performing an obstetrical examination  

After determining it’s time to intervene, the obstetrical examination is the next step. Proper restraint during examination is crucial. I have done my fair share of calving assistance from the end of a rope, and there is a much higher likelihood of getting hurt or losing the calf without proper restraint. Picture this: getting the calf halfway out, and the heifer decides to jump up and spin from side to side as fast as she can. A squeeze chute or a commercial calving pen is well worth the investment.  

During the examination, use plenty of lubrication and stay as clean as possible. You are checking for complete dilation of the cervix and presentation of the calf. If the cervix is not dilated, you will feel a tight ring of tissue about wrist to mid-forearm deep.  

Normal calf presentation is both front legs with the head between them. If you are unsure which legs are coming, check the joints. The first two joints of the front legs flex the same way, but the first two joints of the back legs flex the opposite way. 

Related:U.S. beef industry can profit from trade with United Kingdom

Malpresentations of the calf will require manipulations to allow delivery. If you get nothing else from this article, please remember this: Do not be afraid to push the calf back in! If there is too much bulk in the birth canal, then it is nearly impossible to safely manipulate and get the legs pulled up.  

Leg back

Push the calf deeper into the uterus to get the head out of the birth canal. When the cow strains against you, the calf’s head will want to pop right back into the pelvis, so I often turn the head to the side. Find the leg that is back and pull on the knee joint so you can get to the hoof. You must cup the hoof with your hand as you pull the leg into the pelvis, so the foot doesn’t poke through the uterus. With bigger calves, oftentimes you must push back on the shoulder or knee with one arm while the hand that is cupping the hoof is pulling it into the birth canal. When both legs are in the pelvis, straighten the head and deliver the calf. 

Head back

 If the shoulders are engaged in the birth canal, push the calf back to get the head turned. The easiest way to grip the head is by the nostrils or to hook the cheek. In my experience, a good percentage of calves that present this way are too big to be delivered safely, so if you are unable to keep the head engaged in the pelvis when you start pulling, the calf likely needs to be delivered by Cesarean. 

Backwards

A backwards calf is one that is presented with back feet coming out. You can pull calves this way, but you have to pull them fast so they don’t inhale fluid or asphyxiate. I always use a mechanical calf puller for backwards calves to ensure as fast a delivery as possible. Make sure the tail is tucked down between the back legs before pulling. 

Breech

A breech presentation is when the calf is coming tail first and both back legs are down. These can be exceptionally difficult to get the back legs up; I would advise seeking the help of your veterinarian for these. If you must try this on your own, you have to get the calf pushed forward out of the birth canal. Then, with one hand you need to push the hock or the rump forward while your other hand cups the foot and flexes the leg into the pelvis. The fun part is having to do it again for the other leg. 

Once you have the calf coming the right way, it is time for delivery! Stay tuned for Part 2, where we will discuss safely pulling and delivering a calf. Refer back to my last piece, "3 Tips to Keep in Mind This Calving Season," for best practices to consider. 

Source: Tony Hawkins, Valley Vet Supply, which is solely responsible for the information provided and is wholly owned by the source. Informa Business Media and all its subsidiaries are not responsible for any of the content contained in this information asset. 

 

Subscribe to Our Newsletters
BEEF Magazine is the source for beef production, management and market news.

You May Also Like