In spite of the increasing trend to limit the amount of steel between your cows and what they eat, feeding hay in the winter is a reality for many beef producers.

Burt Rutherford, Senior Editor

September 25, 2017

3 Min Read
Got hay? Then feed it efficiently
<p><em>Giving rumen microbes the nutrients they need to digest low quality forages will increase the overall feed value of those forages and aid in improving feed efficiency.</em></p>

Since hay and pasture costs can make up between 30% and 35% of a spring-calving cowherd's total production cost, it is imperative for operations to strive for efficient capture, allocation and utilization of forage resources, say Evan Whitley, manager of the Center for Advanced Agricultural Systems and Technologies and Curtis Larson, farm facility manager for the Noble Research Institute, Ardmore, Okla.

This can be done through a systematic grazing management plan and an efficient supplemental feeding program that includes hay as a potential option. “Fortunately, this past summer was pretty good to us, and quite a bit of excess forage production was available to capture [as hay]. However, oftentimes quantity doesn't correlate to quality, which begs the question of how to ensure we properly allocate and utilize hay during the upcoming feeding season regardless of whether the hay is raised or purchased,” they say.

If hay will be supplemented, there is no substitute for a nutrient analysis. Testing is preferably done prior to purchasing and especially before feeding to determine any major deficiencies and additional nutrient needs.

Allocation is also of utmost importance and can alter the overall efficiency by which these "stored" nutrients are utilized. Most often, allocation consists of a hay bale sometimes in a ring, in the middle of a pasture, or next to mineral and a water source.

Related:4 tips to get the most out of hay sampling

Although this is commonly the case, it isn't the most efficient means of feeding hay, they say. Minimally, use a bale ring to maintain the integrity of the bale for as long as possible and to reduce losses caused by trampling and contamination from urination and defecation. To further reduce wastage, consider labor availability and minimize the amount of hay offered, but be sure to meet the daily intake needs of the animals being fed, especially if a hay ring isn't being used.

Many producers trying to further improve the overall efficiency of feeding hay are investigating other means of allocation. Bale processors are one such mechanism of choice and are used to deliver hay in both pasture (windrows/troughs) and pen environments.

“Here at the Noble Research Institute, we have been processing hay at our Oswalt cattle facility for the last year and feeding cows and calves in windrows and bunks. From a strictly nutritional perspective, processing [lightly chopping] hay improves utilization due to the increased accessibility of structural and nonstructural carbohydrates in the hay to the microbial population in the animal's rumen, especially for roughages that are lower in quality. Operationally, the processor is very easy to use and does a good job of uniformly chopping most roughage sources given, including bermudagrass, alfalfa, soybean, rye/ryegrass, switchgrass and native grass,” they say.

Related:6 important factors to consider before you buy a round hay baler

“Overall, we have witnessed less wastage when ‘windrowing’ cows in the pasture, but we have had some difficulty feeding in our concrete bunks, especially in high winds. As with any piece of equipment, we continue to learn more and better ways to use it. A good example is using the processor to cover newly-constructed pond dams and right-of-ways, where it worked very well.”

The biggest potential downside is the machine cost. This has to be weighed on a case-by-case basis depending on the size of the operation, access to resources (labor, hay quality, capital, etc.) and the value placed upon convenience.

About the Author(s)

Burt Rutherford

Senior Editor, BEEF Magazine

Burt Rutherford is director of content and senior editor of BEEF. He has nearly 40 years’ experience communicating about the beef industry. A Colorado native and graduate of Colorado State University with a degree in agricultural journalism, he now works from his home base in Colorado. He worked as communications director for the North American Limousin Foundation and editor of the Western Livestock Journal before spending 21 years as communications director for the Texas Cattle Feeders Association. He works to keep BEEF readers informed of trends and production practices to bolster the bottom line.

Subscribe to Our Newsletters
BEEF Magazine is the source for beef production, management and market news.

You May Also Like